circuiting

英 [ˈsɜːkɪtɪŋ]

美 [ˈsɜːrkɪtɪŋ]

网络  短路求值; 电路

双语例句

• The effect of coating materials on the short circuiting behaviour is also analysed.
  文中还就药皮成分对短路行为的影响进行了试验分析。
• A reasonable comparison welding parameters was designed. Based on the typical short circuiting transfer process, a whole aware of conventional MIG and ultrasonic-MIG hybrid welding was started.
  设计了合理的焊接工艺参数进行对比试验，根据典型的短路过渡过程，在整体上分析了普通MIG焊接和超声-MIG复合焊接短路过渡过程。
• This system can collect the welding current and voltage signals of the CO 2 short circuiting welding during the welding process at very high speed, and analyze the data collected from the welding process, and make out a evaluation about the welding process.
  在该系统中，实现了利用个人计算机对CO2短路过渡焊接过程的电弧电流和电压信号的高速实时采集，并对其信号进行分析，得出对焊接过程的基本估测。
• In this paper, an idea of closed loop real time controlling of short circuiting transfer is proposed and is experimentally studied for decreasing the spatter in the short circuiting transfer process of the CO 2 welding.
  为了减少CO2气体保护短路过渡焊时的飞溅，本文提出了短路过渡过程的闭环实时控制思想并进行了试验研究。
• Studies of Real-time Check of Interrupting Capabilities for Circuit Breaker; Series resonance fault current limiter for recovery voltage after short circuiting of high-voltage circuit breakers at the outlet
  电力系统断路器遮断容量实时校核研究SRFCL对高压断路器出线端短路时恢复电压的影响
• An Investigation on the Relationship of Short Circuiting Frequency and arc Voltage in CO_ 2 arc welding
  CO2电弧焊短路频率与电弧电压关系的探讨
• Combustion and heat transfer character are the technical basis of combustion in circuiting fluid bed boilers.
  燃烧和传热特性是循环流化床锅炉的燃烧技术基础。
• It has been discussed that the understanding of short circuiting transfer mechanism and developing tendency of waveform control methods.
  就当前对熔滴短路过渡的机理的认识及波控法的发展现状予以讨论。
• A study on spatter losses in short circuiting transfer co_2 arc welding with different control methods
  从不同的控制方式中探索短路过渡CO2焊接的飞溅问题
• For short circuiting welding, the welding process should be divided into striking and welding in order to fully improve the welding performance of robot MIG/ MAG welding.
  为了充分提高机器人MIG/MAG焊接性能，对于短路过渡焊，有必要将焊接过程分为引弧期和焊接期。