deoxidizing

英

美

网络  脱氧; 去氧

医学

双语例句

• The preparation of ultrafine WO_3 powders and the deoxidizing and carbonizing of WO_3 to WC were studied. Well abrasive resistant metal composite coating strengthened by ultrafine WC particles was prepared by flame thermal spray method and abrasive wear property was studied.
  本文探索了超细WO3粉的制备及其还原碳化为WC粉的方法，采用火焰热喷涂工艺，制备了耐磨性能较好的超细WC陶瓷&金属复合涂层，并研究了涂层的耐磨性能。
• Third the influence of the liquid steel flowing on the eliminating of firstly deoxidizing products is studied;
  研究了钢液流动现象对一次脱氧去除的影响；
• The relationship between the content of strong deoxidizing elements in the high carbon steel curtain wire ( 82B) and composition of the deoxidation products in various stages is predicted by thermodynamic process.
  用热力学方法预测了高碳帘线钢（82B）中强脱氧元素的含量与各阶段脱氧产物组成之间的关系。
• The analytic results have shown that the new magnesium reduction process deoxidizing by liquid calcium is feasible.
  结果表明，以液态钙为还原剂的还原工艺是可行的。
• The feasibility of producing quality cold rolled sheets through deoxidizing and alloying with Fe-Al-Mn alloy and a process of producing low-carbon aluminium killed steel through deoxidizing and alloying are introduced.
  介绍了攀钢用铝锰铁脱氧合金化生产高级别冷轧薄板用钢的可行性和脱氧合金化生产低碳铝镇静钢的工艺路线。
• The results of this study are significant for the use, deactivation and reactivation of Co-Mo/ γ-Al2O3 deoxidizing catalyst.
  研究结果对Co-Mo/γ-Al2O3非贵金属耐硫脱氧催化剂的使用、失活和再生有重要的意义。
• Metallurgical Problems in Heat-Resistance Steel Composition Design of Deoxidizing Ladle for Refining Mg
  炼镁还原罐用耐热钢成份设计中的金属学问题
• The technology of aluminium deoxidizing and alloying has been studied. That is, after preliminary argon blowing and oxygen detecting for the aluminum containing steel, determine the feeding amount of aluminium according to the oxygen content in steel and then reblow argon.
  对含铝钢经预吹氩定氧后，根据钢中氧含量确定加铝量，再补吹氩的铝脱氧合金化工艺进行研究和探索。
• The composition of the secondly and thirdly deoxidizing products can be controlled through controlling the content of aluminum and calcium of the strong deoxidizing elements, making them have good distortion ability in hot work.
  二次和三次脱氧产物的成分可以通过控制钢液中强脱氧元素铝和钙的含量来控制，使它们具有良好的热加工变形能力。
• Discussion and application of high temperature combustion technology in magnesium deoxidizing furnace
  高温空气燃烧技术在金属镁还原炉上的应用探讨