extruding

英 [ɪkˈstruːdɪŋ]

美 [ɪkˈstruːdɪŋ]

v.  (被)挤压出，排出，喷出; (把金属或塑料)挤压成，压制
extrude的现在分词

机械

柯林斯词典

• VERB 挤压出;挤压成;压制
  If a substanceis extruded, it is forced or squeezed out through a small opening.
  1. These crystals are then embedded in a plastic, and the plastic is extruded as a wire...
     然后将这些晶体嵌入一块塑料，再把塑料挤压成线。
  2. I work in the extruded tube business.
     我做挤压管生意。

双语例句

• Equal lead thickness is assured by invariablenes temperature and pressure of extruding cylinder.
  各部位温度和挤出压力趋于恒定，保证铅层厚度均匀。
• Abstract: on the basis of thoroughly analysing cold extruding techniques of hollow aluminium rivet, a kind of cold extruding technique scheme that is fit to use in small punch presses is put forward.
  文摘：在深入分析了空心铝铆钉所用冷挤压工艺的基础上，提出了适合于在小冲床上进行该空心铝铆钉冷挤压的工艺方案。
• Taking an actual part as an example, the design and manufacture method of the cold extruding die and the warm extruding die were introduced.
  以一具体零件为例，介绍了冷挤压模具和温挤压模具的设计及加工方法。
• That is, it creates a3-D figure by extruding in the direction of the Face object's normal vector.
  也就是说，它在Face对象的法向量方向上进行挤压，创建一个3-D图形。
• I guess the way that they may think twice to use extruding to kill eel.
  我猜他们俩个可能想用挤压的方式把鳗鱼杀死。
• The advantages of the reel internal gear with cold extruding technology replacing traditional metal cutting working method were narrated, and the technological for the reel internal gear was analyzed.
  叙述了卷筒内齿轮用冷挤压工艺代替传统的金属切削加工方法的优点，并对卷筒内齿轮进行了工艺分析。
• If used properly, heating materials crashing and extruding furnace lining will occur.
  如使用不当，还会出现加热材料碰撞和挤压炉衬现象。
• The quick phosphatizing method of cold extruding die parts and its defects, as well as the solving methods are introduced respectively.
  介绍了冷挤压模具零件的快速磷化方法及其缺陷分析与改进措施。
• Extruding dies act in a corresponding manner in displacing the Body of the metal under direct pressure.
  挤压模以相似的方式，在直接的压力下使金属体移动。
• But you can also create a torus or sphere by extruding along a circular path.
  但是还可以沿着圆形路径挤压来创建圆环体或球形。