hob

英 [hɒb]

美 [hɑːb]

n.  炉盘; 厨房烤炉搁架; (旧时放在炉侧用于加热锅等的)火炉搁架，壁炉搁架
v.  滚铣; 给…钉平头钉

复数：hobs　现在分词：hobbing　过去式：hobbed　第三人称单数：hobs　过去分词：hobbed　

机械

Collins.1 / BNC.16500 / COCA.35459

牛津词典

noun

• 炉盘；厨房烤炉搁架
  the top part of a cooker where food is cooked in pans; a similar surface that is built into a kitchen unit and is separate from the oven
  1. an electric/a gas hob
     电炉 / 煤气炉炉盘
• （旧时放在炉侧用于加热锅等的）火炉搁架，壁炉搁架
  a metal shelf at the side of a fire, used in the past for heating pans, etc. on

柯林斯词典

• （炉具上的）搁架，炉盘
  Ahobis a surface on top of a cooker or set into a work surface, which can be heated in order to cook things on it.

in AM, use 美国英语用 burner

英英释义

noun

• a shelf beside an open fire where something can be kept warm
• a hard steel edge tool used to cut gears
• (folklore) fairies that are somewhat mischievous
  Synonym:elfgremlinpixiepixybrownieimp
• (folklore) a small grotesque supernatural creature that makes trouble for human beings
  Synonym:goblinhobgoblin

verb

• cut with a hob

双语例句

• The overall and set medium modulus of hard alloy hob used for processing and bakelite has cast iron gear.
  中等模数的整体和镶片硬质合金滚已用于加工铸铁和胶木齿轮。
• Double Circular-arc Gear Hob CAD System Research and Development
  双圆弧齿轮滚刀CAD系统研究与开发
• The involute generative hob can also manufacture of arc gear, cycloid gear and sprocket, etc.
  非渐开线展成滚刀还可加工圆弧齿轮、摆线齿轮和链轮等。
• This paper studies the relief grinding problem of the hob of point contact worm gear drive and puts forward a one-parameter enveloping method to calculate the axial profile of relief grinding wheel.
  本文研究了加工经可控曲率修正的蜗轮齿面的滚刀设计问题，建立了相应的数学模型，并应用计算铲磨蜗轮滚刀刃形曲线的单参数包络法，求出铲磨砂轮截形曲线。
• The forming principle of Niemann worm wheel hob is described, the curved face equation of Niemann worm is deduced, and the normal profile of the worm wheel hob is calculated.
  论述了尼曼蜗轮滚刀的成形原理，推导了尼曼蜗杆曲面方程，计算了蜗轮滚刀的法向齿形。
• Turns out I had lit the wrong hob.
  原来是我打开了错的炉灶。
• Theoretical analysis and experimental study of planet gear cutting by single Novikov gear hob
  采用单圆弧滚刀切制行星轮齿的分析与研究
• Profile Design and Accuracy Analysis on Gear Hob of Front Rake Angle
  正前角齿轮滚刀的齿形设计和精度分析
• Hydraulic hob mandrel clamping.
  液压滚心轴夹紧。
• VB-Based CAD System for Gear Cutter Hob
  基于vb环境的滚齿刀辅助设计系统