indentations

英 [ˌɪndɛnˈteɪʃənz]

美 [ɪnˌdɛnˈteɪʃənz]

n.  缺口; 凹陷; 凹痕; 行首缩进; 行首空格; 造成凹陷(或缺口); 将行首缩进
indentation的复数

柯林斯词典

• 行首缩格,行首留空格
  Anindentationis the space at the beginning of a line of writing when it starts further away from the edge of the paper than all the other lines.
• N-COUNT 凹口;缺口
  Anindentationis a shallow hole or cut in the surface or edge of something.
  1. Using a knife, make slight indentations around the edges of the pastry.
     用刀子绕馅饼边沿刻小锯齿。

双语例句

• Not even the long rows of windows and stores, the indentations of the chimneys, and the roofs, and the vague reflections, which are cast back by the wet and muddy pavements, were visible.
  甚至连一排排一层层的窗户、犬牙交错的烟囱和屋顶、泥泞路面的微弱反光也都看不见。
• Invisible ink, pinpricks and indentations on letters were all used to convey details of troop movements, bombing raids and ship-building.
  信中的隐性墨水、针眼和印凹痕都透露着部队动向、炸弹突袭和军舰装备等信息。
• Using a nano-sized needle, they poked the cement samples, and measured the indentations using an atomic force microscope.
  他们利用纳米级的针头刺进水泥样品中，借助原子力显微镜测得内部空隙的形状。
• Xtrace: iprint= awt activates method trace and set the output to stderr with indentations.
  iprint=mt激活方法跟踪并将输出发送到stderr，进行缩进。
• Because I saw some indentations in the paper.
  因为我在纸上看到一些凹痕。
• The endothelium of the middle cortical arteries was very rough and there were indentations of the cells.
  皮质中动脉：内皮较粗糙有细胞压迹。
• Watch out for the effects that the spacing between borders and paragraph area produces on indentations and tabulations.
  注意由于缩进或者表格在边框和段落区域之间产生的间隔的影响。
• The link of steel sheeting with concrete in a composite deck slab relies on vertical wave troughs and indentations.
  对配置横向剪力钢筋的压型钢板-轻骨料混凝土组合楼板的抗滑移性能进行了研究。
• The varying distance between the microhardness indentations at the blanks of the cracks as a function of applied loads could be monitored to determine the crack opening displacements near the crack tip, which were used to obtain the crack opening load.
  通过测量裂尖后两岸显微硬度压痕随裂纹张开闭合的距离变化，建立了缺口根部角裂纹裂尖附近的裂纹张开位移和载荷的关系，以此确定裂纹的张开应力。
• PITTED: Small indentations appearing as black dots on finished surfaces of any piece of product; undesirable surface defects.
  麻面：在任何成品零件的表面上出现的小的黑色的麻点，这是不希望的缺陷。