tolerances
英 [ˈtɒlərənsɪz]
美 [ˈtɑlərənsɪz]
n. 忍受; 容忍; 宽容; 宽恕; 忍耐力; 忍受性; 耐力; 耐量; 公差; 容限
tolerance的复数
柯林斯词典
- N-UNCOUNT 宽容;容忍
Toleranceis the quality of allowing other people to say and do as they like, even if you do not agree or approve of it.- ...his tolerance and understanding of diverse human nature.
他对人性多面性的宽容与理解 - …the acceptance and tolerance of other ways.
对其他方法的接受与宽容
- ...his tolerance and understanding of diverse human nature.
- N-UNCOUNT 忍耐(力);忍受(力)
Toleranceis the ability to bear something painful or unpleasant.- There is lowered pain tolerance, lowered resistance to infection.
对疼痛的忍耐力降低了，对感染的抵抗力也减弱了。 - ...a low tolerance of errors.
对错误的低容忍度
- There is lowered pain tolerance, lowered resistance to infection.
- N-VAR 耐受性
If someone or something has atolerance toa substance, they are exposed to it so often that it does not have very much effect on them.- As with any drug taken in excess, your body can build up a tolerance to it.
和过量服用任何其他药物一样，身体会对它产生耐药性。
- As with any drug taken in excess, your body can build up a tolerance to it.
双语例句
- Such dimensions are not governed by general tolerances.
这样的尺寸不受通用公差控制。 - Integration of the fixing points in the door frames made of Die-cast Aluminium ensures easy assembly and minimum tolerances.
新款车在压铸铝车门框架中集成了固定点，这不仅方便了装配，而且实现了公差最小化。 - There are very fine tolerances, and very high quality standards.
这些铸件有着很好的耐力和非常高的质量标准。 - The boost pressure is a variable which is influenced by engine tolerances and ambient conditions.
增压压力是一个受发动机公差和环境条件影响的变量。 - Rough steel castings-General tolerances, machining allowances; inactive for new design.
钢毛坯铸件。一般公差及加工余量。不适用于新设计。 - Take critical site dimensions to ensure tolerances and clearance to other building site work.
考虑关键现场尺寸，保证与其他现场工作建筑的裕度和净空。 - Reduced contact force due to temperature effect and control module tolerances.
由于温度效应和控制单元公差导致的接触力降低。 - Non-rotating stem has close roundness and straightness tolerances and is burnished for a superior surface finish.
不旋转阀杆避免了圆度和直度偏差，并且具有相当好的表面光洁度。 - Selected combinations of RC components guarantee wave shape parameters to be within tolerances.
所选RC组件的结合确保了波形参数保持在容差范围内。 - The methods to measure the dimensions and the steps to control the tolerances should be described in these procedures.
该程序应描述所使用的尺寸测量的方法和尺寸公差控制的措施。